Router Table Dust Hood
When using my router table, a hose from my dust collection system attached to my router table fence has always done a great job keeping the dust at bay in my shop. However, when my fence is removed for free-hand routing, I didn’t have an adequate way to capture all of the dust and chips. To solve that problem, I built the router table dust hood you see here.
Chop Saw Enclosure
I got fed up with the mess from my slide mitre saw so decided to make an enclosure from which the dust could be extracted. It is certainly ...
41 Genius Sanding Tips You Need to Know
Save yourself some time and hassle during your next woodworking project with one (or 41!) of these genius sanding tips from editors and readers.
The 100 Handiest Shop Tips
Check out a collection of some of our favorite workshop tips and DIY ideas through the years from readers and editors at The Family Handyman.
Radial Arm Saw Dust Collector
It does not capture the mess as completely as the vacuum schemes, but it sure cuts way down on the amount of clean-up needed most of the time.
Dust collection and radial arm saw
It seems that most radial arm set ups I have seen show the ducting coming from above the hood. Do you think it would be a problem for the ducting to come from below the hood and suction down? thanks...Tom
Radial Arm Dust Collection
Radial Arm Dust Collection. A slight modification on an existing design. It really works well. Cleanest cross cutting setup I have EVER had. Thanks to this g...
Radial Arm Saw Dust Collection
Here is a link to a "video.":http://youtu.be/7N0zHs7soqA Not my design. Works REAL well. I added vent holes to the fence. Cleanest cross cutting setup I have ever had. Waaaaay better that my SCMS.
Build an Accessory Shelf for a ShopSmith Mark V
Build an Accessory Shelf for a ShopSmith Mark V: Build an Accessory Shelf for a ShopSmith Mark VLast year I purchased an early 1980’s ShopSmith Mark V (500 model) from a family member of a friend in our town. It was in great condition and, after a few months of tinkering and using it, I came to ap…
Miter Saw Dust Collection
Miter Saw Dust Collection: A few months back I built a no fence miter saw station for my garage shop. Today, I’m upgrading the miter saw station with dust collection. I made a dust hood with sliding adjustable doors which makes it easy to open up for mitered cuts. I’ll also s…