Jaroslav Štulajter

Jaroslav Štulajter

Jaroslav Štulajter
Viac nápadov od Jaroslav
Wisząca doniczka

Wisząca doniczka

Самодельное , ручное приспособление для изготовления шишек - корзинок , без токарных работ. - YouTube

Самодельное , ручное приспособление для изготовления шишек - корзинок , без токарных работ. - YouTube

Mini Metal Lathe

Mini Metal Lathe

Working the Angles

Working the Angles

An easy to follow step-by-step tutorial on building sheet metal brakes.

An easy to follow step-by-step tutorial on building sheet metal brakes.

Welders Universe - Stick Electrode and Filler Rod Guide

Welders Universe - Stick Electrode and Filler Rod Guide

Example of good and bad MIG welds                                                                                                                                                     More

Example of good and bad MIG welds More

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

This is my favourite and pretty much the most used tool around the workshop. I have a proper Bench Grinder which I never use anymore. Simply because compare to a vice mounted hand held grinder it is a lot less powerful. Plus with this contraption I can use the Wire Wheel, the Sander and the Grinding Wheel for long periods of time and with a lot more control. It costs next to nothing to make.

This is my favourite and pretty much the most used tool around the workshop. I have a proper Bench Grinder which I never use anymore. Simply because compare to a vice mounted hand held grinder it is a lot less powerful. Plus with this contraption I can use the Wire Wheel, the Sander and the Grinding Wheel for long periods of time and with a lot more control. It costs next to nothing to make.