Rebecca Janis on Instagram: "Detailed step by step 👇🏻 • Cut the sides of the drawer box to size. Make them the same size or 1/2” longer than your drawer slides. Height depends on how many drawer boxes you will have. • Attach the sides of the box to the slides using a spacer. I use a 3/4” piece of scrap so I can pull out the slide and screw it into the wood. • Measure between the two side pieces to get the measurements for the front and back piece. • Cut the front and back piece to size. I like to use 3/4” birch plywood. • Use pocket holes and wood glue to attach the front and back. The front with the pocket holes should be facing towards you and the back ugh the pocket holes should be facing towards the back. That way when you go to install the drawer front the pocket holes will be h
