Marián Tovarňák

Marián Tovarňák

Marián Tovarňák
Viac nápadov od Marián
It seems the new L-motor have good potential for powering MOC engines. With it's pin holes it can be attached in a compact yet robust way. This was my first concept with 20T to 12T gearing

It seems the new L-motor have good potential for powering MOC engines. With it's pin holes it can be attached in a compact yet robust way. This was my first concept with 20T to 12T gearing

The drive train of the BR 55 engine. In order to get the see through between boiler and chassis and also keep the boiler narrow I had to put the motor in the fire box. The best place for the gears down to the wheel axles however seemed to be between the cylinders. The 16L axle runs through the (open) bottom of the boiler. For the connecting and coupling rods I'm using Ben Coifmans custom gear. The connection between connecting rod and piston rod sits beside the coupling rod which caused…

The drive train of the BR 55 engine. In order to get the see through between boiler and chassis and also keep the boiler narrow I had to put the motor in the fire box. The best place for the gears down to the wheel axles however seemed to be between the cylinders. The 16L axle runs through the (open) bottom of the boiler. For the connecting and coupling rods I'm using Ben Coifmans custom gear. The connection between connecting rod and piston rod sits beside the coupling rod which caused…

6406262733_8825a06853_z_d.jpg

6406262733_8825a06853_z_d.jpg

To display Legos....jd has put together so many Lego sets to only have to take it apart. Wish I'd thought of this b4....

To display Legos....jd has put together so many Lego sets to only have to take it apart. Wish I'd thought of this b4....

legos

legos

I've had this idea since the lid piece came out back in 2003(?) but never tried actually building it until this past Christmas day. It came out a whole lot smaller than I thought.

I've had this idea since the lid piece came out back in 2003(?) but never tried actually building it until this past Christmas day. It came out a whole lot smaller than I thought.

https://flic.kr/p/8SepV5 | BR65 Drivetrain | By request a peek inside the BR65. This shows the layout of the drivetrain. The motor sits in the front part of the boiler, the battery box fills the rest of the boiler. The blind drivers are on #2 axles and are only held in place by the connecting rods (omitted in this picture).

https://flic.kr/p/8SepV5 | BR65 Drivetrain | By request a peek inside the BR65. This shows the layout of the drivetrain. The motor sits in the front part of the boiler, the battery box fills the rest of the boiler. The blind drivers are on #2 axles and are only held in place by the connecting rods (omitted in this picture).

Long Curves | World of Bricks | Holger Matthes - created via https://pinthemall.net

Long Curves | World of Bricks | Holger Matthes - created via https://pinthemall.net

All sizes | SP Hi-Cube boxcar truck detail | Flickr - Photo Sharing!

All sizes | SP Hi-Cube boxcar truck detail | Flickr - Photo Sharing!

DSCN0319a | Flickr - Photo Sharing!

DSCN0319a | Flickr - Photo Sharing!