Viac nápadov od Mayer
Homemade Hold-downs

Homemade Hold-downs

Familiarity with #tree types and #wood grain is one of the most important skills of #woodworking.

Familiarity with #tree types and #wood grain is one of the most important skills of #woodworking.

Dovetail Marker

Dovetail Marker

Shop Carts Are Your Best Friends with a Flip-Up Side

Shop Carts Are Your Best Friends with a Flip-Up Side

Fold-Down Cutting Rack | WoodworkerZ.com

Fold-Down Cutting Rack | WoodworkerZ.com

Idea for making angles(attach protractor on one end

Idea for making angles(attach protractor on one end

DIY Tip of the Day: Jacked-Up Outfeed Roller. To assemble an adjustable outfeed roller for your table saw and other power tools, drill holes in the base of a scissors jack and bolt it to a sturdy sawhorse. Bolt a bracketed roller (about $20 at woodworking stores) to the top of the jack. For faster adjustments, chuck a screw hook into a cordless drill (photo) and insert it in the jack’s drive hole.

DIY Tip of the Day: Jacked-Up Outfeed Roller. To assemble an adjustable outfeed roller for your table saw and other power tools, drill holes in the base of a scissors jack and bolt it to a sturdy sawhorse. Bolt a bracketed roller (about $20 at woodworking stores) to the top of the jack. For faster adjustments, chuck a screw hook into a cordless drill (photo) and insert it in the jack’s drive hole.

Add an adjustable outfeed roller to your sawhorse

Add an adjustable outfeed roller to your sawhorse

Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.......d.

Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.......d.

DIY Tip of the Day: Portable roller stand. Ripping a long board on a small portable table saw can be dangerous without extra support. If you don’t have a helper, clamp a short-nap paint roller to a sawhorse as a roller stand. Tighten the clamp firmly to prevent slipping. As you move around your work area, carry the sawhorse along. Now you’ll always have support to safely cut long boards. - William A. Goldbach

DIY Tip of the Day: Portable roller stand. Ripping a long board on a small portable table saw can be dangerous without extra support. If you don’t have a helper, clamp a short-nap paint roller to a sawhorse as a roller stand. Tighten the clamp firmly to prevent slipping. As you move around your work area, carry the sawhorse along. Now you’ll always have support to safely cut long boards. - William A. Goldbach