nepoviem

48 followers
·
79 following
nepoviem
More ideas from nepoviem
Четырехствольный пистолет Шарпс (кликните по изображению, чтобы увидеть фото полного размера)

Четырехствольный пистолет Шарпс (кликните по изображению, чтобы увидеть фото полного размера)

280$ #vikings #nordic #wotan #weapon #swords #axes #викинги #скандинавия #оружие #мечи #топоры #armor #blade

280$ #vikings #nordic #wotan #weapon #swords #axes #викинги #скандинавия #оружие #мечи #топоры #armor #blade

Building a simple break barrel shotgun from scratch - The Firearm Blog

Building a simple break barrel shotgun from scratch - The Firearm Blog

Metal Plane Making

Metal Plane Making

Making a Dovetailed Infill Smoothing Plane - Jim Yehle

Making a Dovetailed Infill Smoothing Plane - Jim Yehle

Viete prečo Číňania nikdy netrpia bolesťami kĺbov, dokonca ani v starobe? To všetko preto, že raz denne… | MegaZdravie.sk

Viete prečo Číňania nikdy netrpia bolesťami kĺbov, dokonca ani v starobe? To všetko preto, že raz denne… | MegaZdravie.sk

Vymačkejte 1 citron do 1 lžíce olivového oleje a zapamatujete si to do konce svého života

Vymačkejte 1 citron do 1 lžíce olivového oleje a zapamatujete si to do konce svého života

Hand Drawings, Pencil Drawings, Realistic Drawings, Figure Drawings, Portrait Art, Pencil Portrait, Charcoal Portraits, Charcoal Art, Pastel Drawing, Figure Drawing, Digital Paintings, Drawings Of, Etchings, To Draw, Graphite, Portraits, Faces, Artists, Paint, Drawings, Oblivion, Fall Away, Newspaper, Face, Drawings In Pencil, Drawings Of People, Pencil Art, Graphite Drawings

Dremel Flex Shaft Holder by morsa -- There are lots of adapters for mounting the Dremel (or other high speed rotary tools) into the lathe toolpost ().  The holder I show here was made with a 1/2 x 20 nut (thread of the hand piece cap of the flex shaft), and a 6 mm square bar. Two segments, one short and one large, of the square bar are welded to the nut, so the upper face of the long segment is aligned with the center of the nut, and both with the center of the headstock, once mounted in…

Dremel Flex Shaft Holder by morsa -- There are lots of adapters for mounting the Dremel (or other high speed rotary tools) into the lathe toolpost (). The holder I show here was made with a 1/2 x 20 nut (thread of the hand piece cap of the flex shaft), and a 6 mm square bar. Two segments, one short and one large, of the square bar are welded to the nut, so the upper face of the long segment is aligned with the center of the nut, and both with the center of the headstock, once mounted in…