Description Hello! To print the recommend using the program MS Paint (not to be confused with Paint.NET), there is simply a very flexible configuration (borderless printing). Suggest you do a bit of the old Roblox! You will need: 1. Paper (strongly recommend to choose a dense drawing paper) 2. The printer to print and scan(can be b & W, but then paint marker-paint). To print on A4 but can be resized. 3. Scissors and glue. Apply glue needed to the valves only after their flexion and all faces of the part. 4. Stationery cutter for cutting the faces and valves sweep, but you can use a metal protractor with a sharpened angle. 5. Markers or paint to paint the valves and opened the paper ends. BE CAREFUL WHEN ASSEMBLING THE HEAD! Two of the truncated cone and the part with the face of the head can be bent with a rounded surface of a pencil or pen. Ready the details of the figures can be painted on wood. And yet our character can be "animate", that is to make turning arms and head. This can be done with wood toothpicks, the pattern has black markings under them, pierce the marks with a compass and insert the toothpick. Machine translation! Thank you for your attention <3
